Input Shaft and Cluster Gear Disassembly and Assembly: Disassembly

WARNING: This page is about a different variant/trim than selected.

Remove the detent screw at the end of the input driveshaft.

Fig 1: Removing Detent Screw At End Of Input Driveshaft
Courtesy of SUZUKI OF AMERICA CORP.
Remove the snap ring at the base of the gear cluster.

Fig 2: Identifying Snap Ring
Courtesy of SUZUKI OF AMERICA CORP.
Press the input driveshaft from the input shaft cluster gear using the universal bearing puller J-22912-01.

Fig 3: Removing Input Driveshaft From Input Shaft Cluster Gear
Courtesy of SUZUKI OF AMERICA CORP.
Remove the cluster shaft bearing from the input shaft gear cluster using universal bearing puller J-22912-01.

Fig 4: Removing Cluster Shaft Bearing From Input Shaft Gear Cluster
Courtesy of SUZUKI OF AMERICA CORP.