LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Reno Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Ignition System) >> Repair Instructions >> Electronic Ignition System Ignition Coil Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Electronic Ignition System Ignition Coil Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the EI system ignition coil into the mounting location and install the retaining bolts.

    Tighten 

    Tighten the electronic ignition system ignition coil retaining bolts to 10 N.m (89 lb-in).

  2. Connect the EI system ignition coil connector.
  3. Install the ignition wires.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals