LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Reno Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Security And Locks) >> Repair Instructions >> Front Door Lock Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Door Lock Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector.
  2. Connect the lock rods.
    CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
  3. Install the front door lock with the screws.

    Tighten: 

    Tighten the front door lock bolt to 10 N.m (89 lb-in.).

  4. Install the seal trim. Refer to DOOR SEAL TRIM INSTALLATION .
  5. Connect the negative battery cable.
    Fig 1: Identifying Front Door Lock With Screws
    G04720474Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals