Front Door Glass Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Install the glass in the door and position the glass within the window regulator.
CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
Install the glass to the window regulator with the screws.
Tighten:

Tighten the glass screws to 7 N.m (62 lb-in.).
Install the B-pillar molding. Refer to B-PILLAR MOLDING INSTALLATION .
Install the door seal trim. Refer to DOOR SEAL TRIM INSTALLATION .

Fig 1: Identifying Glass, Window Regulator & Screws
Courtesy of SUZUKI OF AMERICA CORP.