LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Reno Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Power Assisted Steering System) >> Repair Instructions >> Dust Boot Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Dust Boot Removal and Installation: Removal

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle.
  2. Remove the wheel. Refer to "WHEEL REMOVAL AND INSTALLATION :".
  3. Remove the outer tie rod. Refer to "OUTER TIE ROD REMOVAL AND INSTALLATION :".
  4. Remove the dust boot retaining clamps.
  5. Remove the dust boot.
    Fig 1: View Of Outer Tie Rod And Dust Boot
    G04103968Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals