Special Tool
WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL
| J5403 J-5403 Snap Ring Pliers | |
| J-6083 Snap Ring Pliers | |
| J-8092 Driver Handle | |
| J-8433-1 Puller Crossbar | |
| J-8433-3 Forcing Screw | |
| J-9398-A Bearing Remover | |
| J-9481 Bearing Installer | |
| J-9553-1 O-Ring Remover | |
| J-9625-A Pressure Testing Connector | |
| J-23128-A Seal Seat Remover and Installer | |
| J-35372 Support Block | |
| J-33011 O-Ring Installer | |
| J-33013-B Hub and Drive Plate Remover and Installer | |
| J-34993 Cylinder Alignment Rods | |
| J-33017 Pulley Rotor and Bearing Installer | |
| J-33019 Bearing Staking Tool Set Includes: J-33019-1 Bearing Staking Guide J-33019-2 Bearing Staking Pin |
|
| J-33020 Pulley Puller | |
| J-34614 Shaft Seal Protector | |
| J-33022 Shaft Nut Socket | |
| J-33023-A Puller Pilot | |
| J-33024 Clutch Coil Installer Adapter | |
| J-33025 Clutch Coil Puller Legs | |
| J-34992 Compressor Holding Fixture | |
| J-33027 Clutch Hub Holding Tool |