Fuel Sender Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Wind the wires (1) the sender assembly (2).

Fig 1: Installing Sender Assembly Onto Fuel Pump
Courtesy of SUZUKI OF AMERICA CORP.
Install the sender assembly onto the fuel pump assembly (1).
NOTE: Unless correctly install the sender assembly, fuel gauge indicate inexactly.
Install the fuel-level sensor onto the sender-housing.
NOTE: Unless correctly install the fuel-level sensor, fuel-level warning lamp indicate inexactly.

Fig 2: Installing Fuel-Level Sensor Onto Sender-Housing
Courtesy of SUZUKI OF AMERICA CORP.
Connect the wire into the insulator connector.

Fig 3: Connecting Wire Into Insulator Connector
Courtesy of SUZUKI OF AMERICA CORP.
Connect the insulator connector.

Fig 4: Connecting Insulator Connector
Courtesy of SUZUKI OF AMERICA CORP.