LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Reno Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Engine Electrical Devices >> Camshaft Position Sensor Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor Removal and Installation: Installation

  1. Install the camshaft position sensor and bolts.

    Tighten: 

    Tighten the camshaft position bolts to 8 N.m (71 lb-in).

  2. Install the timing belt front cover, the crankshaft pulley, the accessory drive belt, and the air filter. Refer to TIMING BELT REMOVAL AND INSTALLATION .
  3. Connect the sensor electrical connector.
  4. Install the engine cover.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals