LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Reno Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Fuel Delivery >> Fuel System >> Diagnostic Information and Procedures >> Fuel System Diagnosis >> Circuit Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit Description

The fuel pump is an in-tank type mounted to a fuel sender assembly. The fuel pump will remain on as long as the engine is cranking or running and the Engine Control Module (ECM) is receiving reference pulses from the Crankshaft Position (CKP) sensor. If there are no reference pulses, the ECM will turn OFF the fuel pump 2 sec. after the ignition switch is turned ON or 2 sec. after the engine stops running. The fuel pump delivers fuel to the fuel rail and the fuel injectors, where the fuel system pressure is controlled from 379 - 393 kPa (55 - 57 psi) by the fuel pump assembly. The excess fuel is returned to the fuel tank.

WARNING:
  • The fuel system is under pressure. To avoid fuel spillage and the risk of personal injury or fire, it is necessary to relieve the fuel system pressure before disconnecting the fuel lines.
  • Do not pinch or restrict nylon fuel lines to avoid damage that could cause a fuel leak, resulting in possible fire or personal injury.
scientia non olet · About LEMON Manuals