LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Reno Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Starter >> Starting System >> Repair Instructions >> Starter Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Starter Removal and Installation: Removal

  1. Remove the nut which secures the starter ground wire to the lower mounting stud and remove the ground wire.
  2. Remove the starter-to-engine block mounting bolt and the starter-to-transmission mounting bolt.
    Fig 1: Identifying Starter-To-Engine Block Mounting Bolt And Starter-To-Transmission Mounting Bolt
    G04716678Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove the starter solenoid nuts to disconnect the electrical cable.
  4. Remove the starter assembly.
    Fig 2: Identifying Starter Solenoid Nut On Starter Assembly
    G04716679Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals