ABS 5.3 Assembly Removal and Installation: Installation

Insert the ABS 5.3 hydraulic unit into its mounting bracket and install the nuts.
Tighten:

Tighten the ABS 5.3 mounting nuts to 15 N.m (11 lb-ft).
Remove the screw plugs and install all of the hydraulic brake pipes.
Tighten:

Tighten the brake pipe nuts to 22 N.m (16 lb-ft).
Connect the 31-pin wiring harness connector J1.
Connect the negative battery cable.
Bleed the hydraulic system. Refer to WHEEL AND TIRES -- VERONA .

Fig 1: Identifying 2006 Hydraulic Unit With Brake Pipes
Courtesy of SUZUKI OF AMERICA CORP.

Fig 2: Removing/Installing EBCM Assembly Mounting Bracket Nuts And Screw Plugs
Courtesy of SUZUKI OF AMERICA CORP.