Fault or Alarm Indication

When the UNLOCK button on the remote transmitter is pressed, the control module/receiver will flash the turn signal lamps to indicate information about the remote keyless entry and anti-theft system.

Normal Condition: If there has not been an intrusion, and no fault has been detected, the control module/receiver will signal a normal condition when the UNLOCK button is pressed. The turn signal lamps will flash twice for 0.5 second, with a 0.5 second pause between flashes.

Alarm Indication: If there has been an intrusion since the last time the LOCK button was pressed, the control module/receiver will signal that there has been an intrusion when the UNLOCK button is pressed. The turn signal lamps will flash twice for 0.5 second, with a 1.5 second pause between flashes.

Alarm and fault information will be erased the next time the transmitter arms the control module/receiver by transmitting a LOCK message.