CPP Switch (For Cruise Control) Removal And Installation: Installation

Reference: CLUTCH PEDAL POSITION (CPP) SWITCH (FOR CRUISE CONTROL) INSPECTION AND ADJUSTMENT 

1. Install CPP switch (for cruise control) (2) to pedal bracket.
2. With clutch pedal (1) released, adjust switch position so that clearance between end of thread and clutch pedal bracket is within specification.

   Clearance between end of thread and clutch pedal bracket 

   "a": 0.5 - 1.5 mm (0.02 - 0.06 in.) 

3. Tighten lock nut (3) to specified torque.

   Tightening torque 

   CPP switch lock nut a: 7.5 N.m (0.75 kg-m, 5.5 lb-ft) 

   Fig 1: Identifying Clearance Between End Of Thread And Clutch Pedal Bracket

   
4. Connect connector to CPP switch (for cruise control) securely.