Clutch Master Cylinder Removal And Installation: Installation

Reverse removal procedure for installation noting the following.

• Apply grease to push rod clevis pin (1).

"A": Grease 99000-25100 SUZUKI Silicone Grease 

• Tighten master cylinder attaching nuts (2) to specified torque.

  Tightening torque 

  Clutch master cylinder attaching nut a: 23 N.m (2.3 kg-m, 17.0 lb-ft) 

  Fig 1: Identifying Clutch Master Cylinder Attaching Nuts

  Courtesy of SUZUKI OF AMERICA CORP.
• Fill reservoir with specified brake fluid and check fluid leakage.
• After installation, bleed air from clutch system and check clutch pedal free travel. Refer to AIR BLEEDING OF BRAKE SYSTEM for air bleeding procedure.
  Fig 2: Identifying Air Bleeding From Clutch System

  Courtesy of SUZUKI OF AMERICA CORP.