Clutch Master Cylinder Inspection

Reference: CLUTCH MASTER CYLINDER REMOVAL AND INSTALLATION 

• Check master cylinder (1) for damage and fluid leakage, boot for damage and deterioration, gasket for damage and deterioration.
• Check for push rod clevis distance "a" and clevis pin hole diameter "b" as shown.

  If any malfunction is found, replace master cylinder.

  Push rod clevis distance "a": 

  106.1 - 107.1 mm (4.18 - 4.22 in.) 

  Clevis pin hole diameter "b": 

  10.05 - 10.15 mm (0.396 - 0.399 in.) 

  Fig 1: Identifying Push Rod Clevis Distance & Clevis Pin Hole Diameter

  Courtesy of SUZUKI OF AMERICA CORP.