LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Grand Vitara Premium, RWD, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension >> Specification >> Tightening Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Tightening Torque Specifications

TORQUE SPECIFICATIONS

Fastening part Tightening torque
N.m kgf-m lb-ft
Tie-rod end lock nut 65 6.5 47.0
Strut bracket nut 135 13.5 98.0
Brake hose mounting bolt 25 2.5 18.0
Stabilizer joint nut 60 6.0 43.5
Front wheel speed sensor harness clamp bolt 10 1.0 7.5
Strut support nut 50 5.0 36.5
Wheel nut 100 10.0 72.5
Strut nut 70 7.0 51.0
Wheel hub housing bolt 50 5.0 36.5
Caliper carrier bolt 85 8.5 61.5
Drive shaft nut 200 20.0 145.0
Suspension arm ball joint nut 55 5.5 40.0
Front wheel speed sensor bolt 10 1.0 7.5
Tie-rod end nut (early) 45 4.5 32.5
Tie-rod end castellated nut (later) (1) 43 4.3 31
Suspension control arm ball joint nut 55 5.5 40.0
Suspension control arm nut 135 13.5 98.0
Stabilizer bar mounting bracket bolt 50 5.0 36.5
Suspension frame mounting bolt 135 13.5 98.0
Engine front body side mounting nut 55 5.5 40.0
Pipe bracket bolt 11 1.1 8.0
Union gear box bolt 35 3.5 25.5
(1) After tightening tie-rod end nut to specified torque, match next first slot of nut with hole of tie-rod end for insertion of cotter pin (rotation angle 60° max).
NOTE: Specified tightening torque is also found in FigureFigure, Figure & Figure .