LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Grand Vitara Premium, RWD, Standard >> Repair and Diagnosis >> Steering >> Manual Steering >> Power Assisted Steering System >> Repair Instructions >> Rack Boot/Tie-Rod Removal And Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rack Boot/Tie-Rod Removal And Installation: Removal

  1. Remove P/S gear case assembly, referring to P/S GEAR CASE ASSEMBLY REMOVAL AND INSTALLATION .
  2. For ease of adjustment after installation, make marking (4) of tie-rod end lock nut position of tie-rod thread.
  3. Loosen tie-rod end lock nut (2) and remove tie-rod end.
  4. Remove boot wire and clip.
  5. Remove boot (3) from tie-rod (1).
    Fig 1: Identifying Tie-Rod Boot
    G04809140Courtesy of SUZUKI OF AMERICA CORP.
  6. Remove tie-rod (1) from steering gear case (2).
    Fig 2: Identifying Steering Gear Case & Tie-Rod
    G04809141Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals