Rear Seat Belt Inspection
Reference: REAR SEAT BELT REMOVAL AND INSTALLATION
WARNING:
Be sure to read PRECAUTIONS ON SERVICE AND DIAGNOSIS OF SEAT BELT before starting to work and observe every precaution during work.
- Check the rear seat belt in the same way as Front Seat Belt Inspection
- As to seat belts with A-ELR, check them as follows.
- With vehicle at stop, pull seat belt all the way out, let it retract a little and try to pull it. It should not be pulled out, that is, it should be locked where retracted.
- Let seat belt retract to its original state. Next, pull it half way out, let it retract a little and try to pull it again. It should be pulled out smoothly, that is it should not be locked at this time.