"AIR BAG" Warning Lamp Flashes: Troubleshooting
TROUBLESHOOTING
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | Was "Air Bag Diagnostic System Check" performed? | Go to Step 2. | Go to AIR BAG DIAGNOSTIC SYSTEM CHECK:EXCEPT ADVANCED AIR BAG . |
| 2 | Is vehicle equipped with "AIR BAG" monitor connector? | Go to Step 3. | Go to Step 4. |
| 3 | Check "AIR BAG" monitor coupler. Is the diagnosis switch terminal in "AIR BAG" monitor coupler connected to body ground with service wire? |
Remove service wire. | Go to Step 4. |
| 4 |
|
Clean up terminal or harness. | Substitute a known-good SDM and recheck. |
NOTE:
Upon completion of inspection and repair work, perform the following items.
- Reconnect all air bag system components and ensure all components are properly mounted.
- Repeat AIR BAG DIAGNOSTIC SYSTEM CHECK:EXCEPT ADVANCED AIR BAG to confirm that the trouble has been corrected.