"AIR BAG" Warning Lamp Does Not Come ON: Troubleshooting
TROUBLESHOOTING
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | Was "Air Bag Diagnostic System Check" performed? | Go to Step 2. | Go to AIR BAG DIAGNOSTIC SYSTEM CHECK:EXCEPT ADVANCED AIR BAG . |
| 2 |
|
Go to Step 3. | Check and correct the following possible cause. Open circuit in "BLK/YEL" or "PPL/RED" wire. Short circuit between "BLK/YEL" or "PPL/RED" and ground.
|
| 3 |
|
Substitute a known-good SDM and recheck. | "YEL/BLK" circuit shorted to power circuit. If OK, replace combination meter. |
NOTE:
Upon completion of inspection and repair work, perform the following items.
- Reconnect all air bag system components and ensure all components are properly mounted.
- Repeat AIR BAG DIAGNOSTIC SYSTEM CHECK:EXCEPT ADVANCED AIR BAG to confirm that the trouble has been corrected.