Side-Air Bag (Inflator) Module Removal and Installation: Installation

Reference: SIDE-AIR BAG (INFLATOR) INSPECTION:ADVANCED AIR BAG 

1. Confirm sleeve (1) is surely installed in side-air bag (inflator) module.
2. Tighten sleeve lock nut (2) to specified torque.

   Tightening torque 

   Sleeve lock nut a: 2.5 N.m (0.25 kg-m, 2.0 lb-ft) 

3. Install new clip to seat back.
   Fig 1: Identifying Seat Back Clip

   Courtesy of SUZUKI OF AMERICA CORP.
4. Connect side-air bag (inflator) module connector (1) securely as shown in the figure.
   1. Connect connector.
   2. Lock connector with lock button (2).
      Fig 2: Connecting Side-Air Bag (Inflator) Module Connector

      Courtesy of SUZUKI OF AMERICA CORP.
5. Insert claw (1) of side-air bag (inflator) module on installation hole (2).
6. Push side-air bag (inflator) module into clip (3) with specified force.

   Side-air bag (inflator) module installation force 

   Pushing force: 180 N 

   Fig 3: Installing Side-Air Bag (Inflator) Module Into Clip

   Courtesy of SUZUKI OF AMERICA CORP.