Driver Air Bag (Inflator) Module Removal and Installation: Removal

Disconnect negative (-) cable at battery.
Disable air bag system. Refer to DISABLING AIR BAG SYSTEM:ADVANCED AIR BAG .
Remove steering wheel side caps (2).
Loosen driver air bag (inflator) module mounting bolts (1) till it turns freely, pull them out and fix them to bolt clamps.

Fig 1: Identifying Driver Air Bag (Inflator) Module Mounting Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Remove air bag (inflator) module from steering wheel.
Disconnect driver air bag (inflator) module connector (1) of driver air bag (inflator) module as shown in the figure.
1. Unlock lock button (2).
2. With lock button unlocked, disconnect connector.
  
  Fig 2: Disconnecting Driver Air Bag (Inflator) Module Connector
  Courtesy of SUZUKI OF AMERICA CORP.