DTC Troubleshooting
DTC TROUBLESHOOTING
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | Was "Air Bag Diagnostic System Check" performed? | Go to Step 2. | Go to AIR BAG DIAGNOSTIC SYSTEM CHECK:ADVANCED AIR BAG . |
| 2 |
|
Go to Step 3. | For DTC B1087: High resistance or open wire in "WHT/RED" circuit or "LT GRN/BLK" circuit. For DTC B1097: High resistance or open wire in "WHT/GRN" circuit or "LT GRN" circuit. |
| 3 | Measure resistance between "L33-13" terminal and body ground, and "L33-14" terminal and body ground (for DTC B1087) or between "L33-15" terminal and body ground, and "L33-16" terminal and body ground (for DTC B1097). Special Tool (A): 09932-76010 Is each measured resistance infinity? |
Go to Step 4. | For DTC B1087: "WHT/RED" circuit or "LT GRN/BLK" circuit shorted to ground. For DTC B1087: "WHT/GRN" circuit or "LT GRN" circuit shorted to ground. |
| 4 | Check side-sensor referring to SIDE-SENSOR INSPECTION:ADVANCED AIR BAG . Is it in good condition? |
Substitute a known-good SDM and recheck. | Replace side-sensor referring to SIDE-SENSOR REMOVAL AND INSTALLATION:ADVANCED AIR BAG . If DTC still exists, substitute a known-good SDM and recheck. |
NOTE:
Upon completion of inspection and repair work, perform the following items.
- Reconnect all air bag system components and ensure all components are properly mounted.
- Clear DTCs referring to DTC CLEARANCE:ADVANCED AIR BAG , if any.
- Repeat AIR BAG DIAGNOSTIC SYSTEM CHECK:ADVANCED AIR BAG to confirm that the trouble has been corrected.