DTC Troubleshooting
DTC TROUBLESHOOTING
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | Was "Air Bag Diagnostic System Check" performed? | Go to Step 2. | Go to AIR BAG DIAGNOSTIC SYSTEM CHECK:ADVANCED AIR BAG . |
| 2 |
Is it in good condition? |
Go to Step 3. | Repair "RED/GRN" circuit. |
| 3 |
With ignition switch ON, Is voltage in 9 - 16V? |
Go to Step 4. | Repair "RED" circuit. |
| 4 |
Is continuity indicated? |
Substitute a known-good SDM and recheck. If DTC is still indicated, substitute a known-good OCM and recheck. | High resistance or open circuit in "BLK" circuit. |
NOTE:
Upon completion of inspection and repair work, perform the following items.
- Reconnect all air bag system components and ensure all components are properly mounted.
- Clear DTCs referring to DTC CLEARANCE:ADVANCED AIR BAG , if any.
- Repeat AIR BAG DIAGNOSTIC SYSTEM CHECK:ADVANCED AIR BAG to confirm that the trouble has been corrected.