Transmission Range Sensor Removal And Installation: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect negative cable at battery.
Hoist vehicle.
Disconnect transmission range sensor connector (1).

Fig 1: Identifying Transmission Range Sensor Connector
Courtesy of SUZUKI OF AMERICA CORP.
Unbend bend parts of lock washer (1), then remove manual shift shaft nut (2), lock washer (1) and grommet.
Remove transmission range sensor (3) by removing sensor bolt (4).

Fig 2: Identifying Lock Washer, Shift Shaft Nut & Range Sensor
Courtesy of SUZUKI OF AMERICA CORP.