Tightening Torque Specifications
WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lb-ft | |
| Tie-rod end lock nut | 65 | 6.5 | 47.0 |
| Strut bracket nut | 135 | 13.5 | 98.0 |
| Brake hose mounting bolt | 25 | 2.5 | 18.0 |
| Stabilizer joint nut | 60 | 6.0 | 43.5 |
| Front wheel speed sensor harness clamp bolt | 10 | 1.0 | 7.5 |
| Strut support nut | 50 | 5.0 | 36.5 |
| Wheel nut | 100 | 10.0 | 72.5 |
| Strut nut | 70 | 7.0 | 51.0 |
| Wheel hub housing bolt | 50 | 5.0 | 36.5 |
| Caliper carrier bolt | 85 | 8.5 | 61.5 |
| Drive shaft nut | 220 | 22.0 | 159.5 |
| Suspension arm ball joint nut | 55 | 5.5 | 40.0 |
| Front wheel speed sensor bolt | 10 | 1.0 | 7.5 |
| Suspension control arm ball joint nut | 55 | 5.5 | 40.0 |
| Suspension control arm nut | 135 | 13.5 | 98.0 |
| Stabilizer bar mounting bracket bolt | 50 | 5.0 | 36.5 |
| Suspension frame mounting bolt | 135 | 13.5 | 98.0 |
| Engine front body side mounting nut | 55 | 5.5 | 40.0 |
| Pipe bracket bolt | 11 | 1.1 | 8.0 |
| Union gear box bolt | 35 | 3.5 | 25.5 |
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENER INFORMATION .