HVAC Unit Removal and Installation: Installation

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Install HVAC unit by reversing removal procedure, noting the following items.
- When installing each part, be careful not to catch any wiring harness.
- Replenish specified amount of compressor oil to compressor suction side referring to PRECAUTIONS ON REPLENISHING COMPRESSOR OIL .
- Install the padding (1) to the installation hole uniformly.
- Fill engine coolant to radiator.
- Enable air bag system referring to:
  ENABLING AIR BAG SYSTEM: ADVANCED AIR BAG or ENABLING AIR BAG SYSTEM: EXCEPT ADVANCED AIR BAG .
- Evacuate and charge system. Refer to OPERATION PROCEDURE FOR CHARGING A/C WITH REFRIGERANT .