Transmission Range Sensor Removal and Installation: Installation
WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara and 2007 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
- Install transmission range sensor (3) and tighten sensor bolt (4) temporarily.
- Install grommet, lock washer (1) and manual shift shaft nut (2).
Tighten nut to specified torque. After tightening it, bend claws of lock washer (1).
Tightening torque
Manual shift shaft nut a: 7 N.m (0.7 kg-m, 5.0 lb-ft)
- After turning manual shift shaft fully counterclockwise, turn it clockwise by 2 notches and set it to "N" range.
- With "N" reference line (5) on range sensor and shaft center (6) aligned, tighten transmission range sensor bolt (4) to specified torque.
Tightening torque
Transmission range sensor bolt b: 13 N.m (1.3 kg-m, 9.5 lb-ft)
- Connect transmission range sensor connector (1).
- Connect negative cable at battery.