A/T Relay Inspection

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara and 2007 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative cable at battery.
Remove integration relay No.2 (1) from fuse box No.2 (2).

Fig 1: Identifying Integration Relay No. 2 & Fuse Box No. 2
Courtesy of SUZUKI OF AMERICA CORP.
Check that there is no continuity between terminals "E41-1" and "E38-8".
If there is continuity, replace relay.
Connect battery positive (+) terminal to terminal "E38-6" of relay. Connect battery negative (-) terminal to terminal "E38-7" of relay. Check for continuity between terminal "E41-1" and "E38-8". If there is no continuity when relay is connected to the battery, replace integration relay No.2.

Fig 2: Checking Continuity Between Terminals "E41-1" & "E38-8"
Courtesy of SUZUKI OF AMERICA CORP.