Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Wiring Harness Electrical Connector From Ignition Coil

Courtesy of SUZUKI OF AMERICA CORP.

Remove the fuel injector sight shield. Refer to FUEL INJECTOR SIGHT SHIELD REPLACEMENT .
Disconnect the engine wiring harness electrical connector(s) (1) from the ignition coil(s).

Fig 2: Identifying Ignition Coil Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Remove the ignition coil bolt(s).
Remove the ignition coil(s).