Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Applying Drops Of Clean Engine Oil To Male Pipe End

Courtesy of SUZUKI OF AMERICA CORP.

WARNING:

Refer to FUEL PIPE FITTING CAUTION .

Apply a few drops of clean engine oil to the male pipe end.

Fig 2: Pushing Retaining Tabs Into Place
Courtesy of SUZUKI OF AMERICA CORP.
Push both sides of the fitting together in order to snap the retaining tabs into place.

Fig 3: Pulling Both Sides Of Fitting To Check Connection
Courtesy of SUZUKI OF AMERICA CORP.
Once installed, pull on both sides of the fitting in order to make sure the connection is secure.

Fig 4: Identifying Fuel Feed Line Quick Connect Fitting Retainer
Courtesy of SUZUKI OF AMERICA CORP.
Install the retainer to the quick-connect fitting.