DTC Confirmation Procedure
WARNING: This page is about a different car, the 2007 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
- Road test should be carried out with 2 persons, a driver and a tester, on a level road.
- With ignition switch turned OFF, connect scan tool.
- Turn ON ignition switch and clear DTC by using scan tool if any.
- Start engine and warm it up to normal operating temperature.
- Drive vehicle for 10 seconds or longer at engine speed between 500 and 4000 r/min.
- Stop vehicle and check DTC by using scan tool.