DTC Confirmation Procedure
WARNING: This page is about a different car, the 2007 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Check to make sure that following conditions are satisfied when using this "DTC Confirmation Procedure".
- Engine coolant temperature: higher than -10°C (14°F).
- The following DTCs are not detected: ECT sensor, MAF sensor, A/F sensor heater and IAT sensor.
- With ignition switch OFF, connect scan tool to DLC.
- Turn ON ignition switch and clear DTC.
- Start engine and warm up to normal operating temperature.
- Run engine at idle speed for 1 min. or more.
- Check DTC and pending DTC.