Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Positioning Seat In Vehicle

Courtesy of SUZUKI OF AMERICA CORP.

NOTE: This step must be performed to assure proper timing of the adjusters.

Adjust the seat adjuster tracks to the fully rearward position.
Position the seat in the vehicle and engage the front adjuster hooks in the floor pan.

Fig 2: Identifying Seat Electrical Connectors
Courtesy of SUZUKI OF AMERICA CORP.
Connect the seat electrical connectors.
Position the seat in the fully forward position to expose the rear bolt locations.

Fig 3: Identifying Seat Adjuster Bolts
Courtesy of SUZUKI OF AMERICA CORP.

CAUTION: Refer to FASTENER NOTICE .
Install the seat adjuster bolts.
Tightening torque

Tighten the bolts to 50 N.m (37 lb ft) .
Install the shoulder belt webbing in the quick disconnect anchor.
Inspect the front seat belt for proper operation.