B2345 13
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the (C2, C4) harness connector at the heated seat module.
- Test for greater than 1.9K ohms of resistance between the following temperature sensor signal and low reference circuits.
- Driver seat cushion terminal 9 (C4) and terminal 6 (C2)
- Passenger seat cushion terminal 20 (C4) and terminal 8 (C2)
- If less than the specified value, test for a short between the signal and low reference circuits. If the circuits test normal, replace the appropriate temperature sensor.
- If all circuits test normal, replace the heated seat module.