B2345 00
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the (C1) harness connector at the heated seat module.
- Test for infinite resistance between the left seat heating element supply voltage circuit terminal 3 and ground.
- If less than the specified range, test the supply voltage circuit and the heating element control circuit for a short to ground.
- Ignition ON, verify that a test lamp does not illuminate between the supply voltage circuit terminal 3 and ground.
- If the test lamp illuminates, test the supply voltage circuit and the heating element control circuit for a short to voltage.
- Test for infinite resistance between the right seat heating element supply voltage circuit terminal 6 and ground.
- If less than the specified range, test the supply voltage circuit and the heating element control circuit for a short to ground.
- Ignition ON, verify that a test lamp does not illuminate between the supply voltage circuit terminal 6 and ground.
- If the test lamp illuminates, test the supply voltage circuit and the heating element control circuits for a short to voltage.
- If all circuits test normal, replace the heated seat module.