Installation Procedure
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the seals, and replace if damaged, using Kent Industries adhesive backed foam tape P/N 46485 or equivalent.
- Install the RH defogger duct to the I/P upper trim panel.CAUTION: Refer to FASTENER NOTICE .
- Install the RH defogger duct screws to the I/P upper trim panel.
Tightening torque
Tighten the screws to 1 N.m (9 lb in).
- Install the instrument panel (I/P) upper trim panel. Refer to INSTRUMENT PANEL UPPER TRIM PANEL REPLACEMENT .