Circuit/System Description
WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
The inflatable restraint sensing and diagnostic module (SDM) monitors the ignition 1 signal from the ignition switch. The SDM also compares the ignition 1 input to the power mode message communicated over the vehicle bus. When the vehicle ignition switch is placed in the RUN or CRANK position, voltage is applied to the SDM ignition 1 input terminal. If a fault is detected in the SDM ignition 1 circuit, then DTC B1370 will set.