How to Identify Tire Pressure Sensor Number
WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara and 2007 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform Steps 4) to 7) within 15 minutes after the vehicle was driven. If more than 15 minutes have elapsed after the vehicle was driven, perform Step 2) again.
- Check each tire for crack, any other damage and air leakage.
- Adjust each tire pressure to 220 kPa.
- Drive vehicle at more than 40 km/h (25 mph) for 2 minutes.
- Adjust the right front tire pressure to 150 kPa.
- Wait for 1 minute with ignition switch in ON position.
- Check DTC referring to DTC CHECK for checking procedure.
- Using the indicated DTC and referring to DTC TABLE , check for the number of the tire pressure sensor. The number indicated by DTC represents the number of the tire pressure sensor of the right front tire.
- Adjust right front tire pressure to 220 kPa.
- Clear DTC referring to DTC CLEARANCE .
- Confirm the number of tire pressure sensor for other tires by same procedure.