DTC Confirmation Procedure
WARNING:
- When performing a road test, select a place where there is no traffic or possibility of a traffic accident and very careful during testing to avoid occurrence of an accident.
- Road test should be carried out with 2 persons, a driver and a tester, on a level road by ECM.
- With ignition switch OFF, connect scan tool.
- Turn ON ignition switch and clear DTC by using scan tool if any.
- Start engine and warm up to normal operating temperature.
- Increase vehicle speed till engine speed is reached 4000 RPM in 3rd gear (M/T) or 2nd range (A/T).
- Release accelerator pedal and with engine brake applied, keep vehicle coasting and then stop vehicle.
- Check DTC by using scan tool.