Fuel Injector Removal And Installation: Removal

Relieve fuel pressure according to FUEL PRESSURE RELIEF PROCEDURE .
Disconnect negative (-) cable at battery.
Remove surge tank cover.
Remove intake air pipe (1) and surge tank pipe (2).

Fig 1: Identifying Intake Air Pipe & Surge Tank Pipe
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect fuel injector couplers and release fuel injector harness from clamps
Disconnect fuel return hose (1) from pressure regulator.
Disconnect vacuum hose (2) from pressure regulator.
Remove fuel pipe bolt (3).
Remove fuel union bolt (4) of fuel delivery pipe (right side).
Remove fuel delivery pipes (right and left) (5) from intake manifold.

Fig 2: Identifying Fuel Return Hose, Vacuum Hose, Fuel Delivery Pipes & Fuel Pipe Bolt
Courtesy of SUZUKI OF AMERICA CORP.