LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Grand Vitara Premium, RWD, Standard >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Aux. Emission Control Devices >> Repair Instructions >> EVAP Canister Removal And Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EVAP Canister Removal And Installation: Removal

  1. Disconnect negative cable at battery.
  2. Hoist vehicle.
  3. Disconnect EVAP leak check module connector.
  4. Disconnect hoses (1) from EVAP canister (2).

    For quick joint of hoses, disconnect it as follows:

    1. Remove mud or rust around joint by blowing compressed air, and push joint fully in arrow direction.
    2. Disconnect hose joint while joint lock is unlocked by pushing both sides of joint.
  5. Remove EVAP canister with EVAP leak check module, EVAP canister air suction filter and its bracket (3).
  6. Remove EVAP canister with EVAP leak check module from its bracket.
  7. Remove EVAP leak check module cover.
  8. Disconnect hoses from EVAP leak check module and EVAP canister.
  9. Remove EVAP leak check module from EVAP canister.
    Fig 1: Identifying EVAP Canister Components
    G04807225Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals