Front Disc Brake Pad Removal And Installation: Installation

Reference: FRONT BRAKE DISC AND PAD INSPECTION 

1. Install pad spring (1) and pads (2).
   NOTE: Install brake pad with wear indicator (5) to vehicle center side on right wheel brake.
   Fig 1: Identifying Pad Spring & Pads

   Courtesy of SUZUKI OF AMERICA CORP.
2. Install caliper and tighten caliper (slide) pin bolts (1) to specification.
   NOTE: Make sure that boots are fit into groove securely.

   Tightening torque 

   Caliper pin bolt a: 36 N.m (3.6 kg-m, 26.0 lb-ft) 

   Fig 2: Tightening Caliper Pin Bolts

   Courtesy of SUZUKI OF AMERICA CORP.
3. Tighten front wheel nuts to specification.

   Tightening torque 

   Wheel nut a: 100 N.m (10.0 kg-m, 72.5 lb-ft) 

   Fig 3: Front Wheel Nuts With Torque Specificationss

   Courtesy of SUZUKI OF AMERICA CORP.
4. Upon completion of installation, perform brake test.