LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Grand Vitara Premium, RWD, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Front >> Repair Instructions >> Front Disc Brake Caliper Disassembly And Assembly >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Disc Brake Caliper Disassembly And Assembly: Disassembly

NOTE: Before disassembly, clean all around caliper with brake fluid.
  1. Remove disc brake piston with air blown into flexible hose joint bolt installation hole.
    WARNING: Do not apply too highly compressed air which will cause piston to jump out of cylinder. Place a cloth (1) to prevent piston from damage, it should be taken out gradually with moderately compressed air. Do not place your fingers in front of piston when using compressed air.
    Fig 1: Removing Caliper Piston Using Compressed Air
    G04808400Courtesy of SUZUKI OF AMERICA CORP.
  2. Remove cylinder boot.
    CAUTION: Be careful not to damage inside (bore side) of cylinder.
  3. Remove piston seal using a thin blade like a thickness gauge, etc.
    CAUTION: Be careful not to damage inside (bore side) of cylinder.
    Fig 2: Caliper Piston Seal
    G04808401Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove bleeder plug and cap from caliper.
scientia non olet · About LEMON Manuals