DTC Troubleshooting
DTC TROUBLESHOOTING CHART
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | Was "Electronic Stability Program Check" performed? | Go to Step 2. | Go to ELECTRONIC STABILITY PROGRAM CHECK . |
| 2 | Check ESP® OFF switch condition Is ESP® OFF switch is OFF condition? |
Go to Step 3. | ESP® OFF switch turned OFF condition and recheck. |
| 3 | Check ESP® OFF switch
Is it good condition? |
Go to Step 4. | Replace ESP® OFF switch. |
| 4 | Check ESP® OFF switch circuit
Is resistance infinity? |
Substitute a known-good ESP® hydraulic unit/control module assembly and check DTC. | "BLU/WHT" wire circuit is shorted to ground. |