DTC Check

Turn ignition switch to OFF position.
Connect SUZUKI scan tool to data link connector (1).
Special Tool
1. SUZUKI scan tool
  
  Fig 1: Connecting SUZUKI Scan Tool To Data Link Connector
  Courtesy of SUZUKI OF AMERICA CORP.
Turn ignition switch to ON position.
Read DTC according to instructions displayed on SUZUKI scan tool and print it or write it down. Refer to scan tool operator's manual for further details.
NOTE: If SUZUKI scan tool can not communicate ABS (ESP®) hydraulic unit/control module, perform SERIAL DATA LINK CIRCUIT CHECK .
After completing the check, turn ignition switch off and disconnect SUZUKI scan tool from DLC.