LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Grand Vitara Premium, RWD, Standard >> Repair and Diagnosis >> Brakes >> Anti-Lock Brakes >> Brakes - Abs >> Diagnostic Information And Procedures >> DTC C1063: Solenoid Valve Power Supply Driver Circuit Failure >> DTC Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Troubleshooting

TROUBLESHOOTING CHART

Step Action YES NO
1  Was "ABS Check" performed?  Go to Step 2. Go to ABS CHECK .
2  Check battery voltage.
Is it about 11 V or higher? 		 Go to Step 3. Check charging system referring to BATTERY INSPECTION and GENERATOR TEST (UNDERCHARGED BATTERY CHECK) .
3  Check main fuse for ABS solenoid and its terminal.
Is it in good condition? 		 Go to Step 4. Replace fuse and check for short circuit to ground.
4 
  1. Turn ignition switch to OFF position.
  2. Disconnect ABS (ESP®) control module connector.
  3. Check for proper connection to ABS (ESP®) control module at terminal "E03-14" (or "E53-1").
  4. If OK, then measure voltage between connector terminal "E03-14" (or "E53-1") and body ground.

Is it 10 - 14 V? 		 Substitute a known-good ABS (ESP®) hydraulic unit/control module assembly and recheck. "WHT/BLU" circuit imperfect short to ground.
scientia non olet · About LEMON Manuals