Ignition Switch Cylinder Assembly Removal And Installation (Without Keyless Start System): Installation

Install ignition switch cylinder assembly as follows.
1. Turn ignition key to "ACC" position.
2. In this state, push ignition switch cylinder assembly into steering lock assembly till it clicks.
Install immobilizer control module (ICM) referring to IMMOBILIZER CONTROL MODULE (ICM) REMOVAL AND INSTALLATION .
Install upper and lower cover and screws (1).
CAUTION: When installing covers, be careful so that each lead wire is not caught between covers.

Fig 1: Identifying Steering Column Screws
Courtesy of SUZUKI OF AMERICA CORP.
Enabling air bag system referring to ENABLING AIR BAG SYSTEM (ADVANCED AIR BAG) or ENABLING AIR BAG SYSTEM (EXCEPT ADVANCED AIR BAG) .