Fuel Level Sensor Inspection
Reference: FUEL LEVEL SENSOR REMOVAL AND INSTALLATION
- Check that resistance between terminals "a" and "b" of fuel level sensor changes with change of float position.
- Check resistance between terminals "a" and "b" at each float position in the following.
If the measured value is out of specification, replace fuel pump and/or sub fuel level sensor.
Main fuel level sensor [A] specifications
MAIN FUEL LEVEL SENSOR [A] SPECIFICATIONS
| Float position | Resistance (Ω) | |
|---|---|---|
| Full Upper "C" | 196.8 mm (7.748 in.) | 19.0 - 21.0 |
| Full Lower "D" | 34.9 mm (1.374 in.) | 129.0 - 132.4 |
Sub fuel level sensor [B] specifications
SUB FUEL LEVEL SENSOR [B] SPECIFICATIONS
| Float position | Resistance (Ω) | |
|---|---|---|
| Full Upper "C" | 64.1 mm (2.524 in.) | 19.0 - 21.0 |
| Full Lower "D" | 244.8 mm (9.638 in.) | 147.6 - 151.0 |