Rear End Door Lock Assembly Removal And Installation: Installation

Reference: REAR END DOOR LOCK ASSEMBLY INSPECTION 

Reverse removal procedure to install rear end door lock assembly noting the following instruction.

• Tighten rear end door latch bolt to specified torque.

  Tightening torque 

  Rear end door latch bolt a: 10 N.m (1.0 kg-m, 7.5 lb-ft) 

  Fig 1: Identifying Rear End Door Latch Bolt

  Courtesy of SUZUKI OF AMERICA CORP.
• Adjust door latch striker so that its center aligns with the center of groove in door latch base.

  Tightening torque 

  Rear end door striker screw a: 23 N.m (2.3 kg-m, 17.0 lb-ft) 

  Fig 2: Identifying Door Latch Striker

  Courtesy of SUZUKI OF AMERICA CORP.